Full integration in RFEM/RSTAB with import of relevant internal forces
Design checks for the elastic-elastic and elastic-plastic methods
Graphical selection of members and sets of members for design
Analysis for several load and design cases
Design based on the buckling field parameters integrated in the cross-section library for the cross-section parts supported on one and both sides
Optional determination of shear stresses according to comment on El. (745)
Possibility to consider the weld thickness in the design of welded cross-sections, which has the effect of a shortening of the cross-section part width
Cross-section optimization with the option to export modified cross-sections
Lines can be imported into RFEM either as lines or members. The names of layers are adopted as the cross-section names, and the first material from the predefined materials is assigned. However, if the section of the Dlubal cross-section library and the material are recognized from the layer name, they are adopted as well.
Full integration in RFEM/RSTAB including import of all relevant internal forces
Intelligent presetting of flexural buckling-specific design parameters
Automatic determination of the distribution of internal forces and classification according to DIN 18800, Part 2
Optional import of buckling lengths from the RF-STABILITY/RSBUCK add-on module. For this, a comfortable graphical selection of the relevant buckling mode is possible
Optimizing Cross-Sections
Optional calculation according to both design methods of DIN 18800, Part 2
Automatic determination of the most unfavorable design location, also for tapered members
Check of c/t-limit values according to DIN 18800, Part 1
Design of any thin-walled RFEM/RSTAB or SHAPE-THIN section for compression and bending without interaction according to the elastic-plastic method
Design of I-shaped rolled and welded sections, I-like sections, box sections, and pipes subjected to bending and compression with iteration according to the elastic-plastic method
Clearly arranged, comprehensible design checks with all intermediate values in the short and long forms
The seismic design result is categorized into two sections: member requirements and connection requirements.
The "Seismic Requirements" include the Required Flexural Strength and the Required Shear Strength of the beam-to-column connection for moment frames. They are listed in the ‘Moment Frame Connection by Member’ tab. For braced frames, the Required Connection Tensile Strength and the Required Connection Compressive Strength of the brace are listed in the ‘Brace Connection by Member’ tab.
The program provides the performed design checks in tables. The design check details clearly display the formulas and references to the standard.
After the design, the results are displayed in different windows sorted by cross-sections, members, sets of members, or x-locations. The corresponding cross-section graphic is always displayed with the result values in tables. In RFEM/RSTAB, they are highlighted by different colors in the structural model. Critical or oversized components can be identified at a glance. You can modify the colors and values assigned.
Result diagrams of a member or a set of members ensure targeted evaluation. It is also possible to represent all intermediate values.
The masses determined during the design are displayed in parts lists for both members and sets of members.
Furthermore, you can export all result tables to MS Excel or in a CSV file. A special transfer menu defines all specifications required for the export.
Do not lose track of stiffnesses and initial deformations. In the individual load cases or combinations, you have the option to modify the stiffnesses of materials, cross-sections, nodal, line and surface supports, and member and line hinges for all or selected members. You can also consider initial deformations from other load cases or load combinations.
Import of relevant information and results from RFEM
Integrated, editable material and section library
Sensible and complete presetting of input parameters
Punching design on columns (all section shapes), wall ends, and wall corners
Automatic recognition of the punching node position from an RFEM model
Detection of curves or splines as a boundary of the control perimeter
Automatic consideration of all slab openings defined in the RFEM model
Construction and graphical display of the control perimeter
Optional design with unsmoothed shear stress along the control perimeter that corresponds to the actual shear stress distribution in the FE model
Determination of the load increment factor β via full-plastic shear distribution as constant factors according to EN 1992‑1‑1, Sect. 6.4.3 (3), based on EN 1992‑1‑1, Fig. 6.21N, or by a user‑defined specification
Numerical and graphical display of results (3D, 2D, and in sections)
Punching design of the slab without punching reinforcement
Qualitative determination of the required punching reinforcement
Design and analysis of the longitudinal reinforcement
Complete integration of results in an RFEM printout report
In a separate dialog box, you can specify extensive detailed settings for the design:
Design Method According to DIN 18800
Design Method 1 According to El. (321)
Design Method 2 According to El. (322)
Analysis method
Elastic-Plastic according to DIN 18800
Elastic-elastic according to a publication by Kretschmar, J./Österrieder, P./beirow, B.
Limit loading of general sections
General sections – these include all cross-sections that cannot be assigned to single or double symmetric I-sections, box sections, or pipe sections – can also be designed according to the equivalent member method against flexural buckling. In this case, however, the plastic cross-section properties are determined without interaction conditions. The allowable application limits for this consideration depend on the ratio of the existing internal force to the fully plastic internal force. Five text boxes provide the option for user-defined control.
Check of limit (c/t)
In this dialog section, you can activate or deactivate the check of c/t ratios.
Treatment of Result Combinations
When designing a result combination, a result set is obtained due to the result superposition on each member location, which makes it impossible to clearly determine the moment factors. In this section, you can thus freely specify a global moment factor for a result combination design. The predefined values are on the safe side, regardless of the design method.
Are you just waiting for your results after the design? The design results are displayed in the usual way in the Steel Design add-on. In the corresponding output tables, you can find the classification, the effective section properties, and the design check, among other things. The stresses are displayed to you graphically on the effective section as well as on the gross section.